Custom creds last for many events when you hand wash lanyards in cool water, air dry them, wipe badge holders gently and store everything sorted by tier away from heat. Custom Creds builds reusable sets with durable straps and swappable inserts, so only the dated card changes each year while the lanyard, holder and reel keep working.

- Hand wash lanyards in cool, soapy water and air dry; skip the dryer and iron.
- Keep dates and event names on inserts so straps stay reusable.
- Store creds clean, dry and sorted by tier, away from sunlight and heat.
- Replace any lanyard whose breakaway no longer releases.
- Custom Creds keeps approved artwork on file for matching reorders from a minimum of 12.
How long do custom creds last if you plan to reuse them?
Custom creds built for reuse can serve several events or a full staff year when you choose durable components and store them properly between uses. The strap, the badge holder and the card wear at different rates, so the smartest plan treats each part separately: a woven or polyester lanyard often outlives the badge holder it carries, and a printed card is the piece most likely to need replacing.
Think about reuse at the quoting stage, not after the event. If the same staff lanyards will come back for next year’s conference, keep the event date and year off the strap and put them on the card instead. The strap stays evergreen, and only the inexpensive insert changes each season.
- Most durable: woven lanyards and rigid badge holders.
- Moderate wear: dye sublimated and screen printed lanyards, badge reels with a metal clip.
- Most replaceable: paper or cardstock inserts, single-event wristbands.
Custom Creds can flag on your mockup which parts of an order are built to be reused and which are meant for a single event, so you know what to collect at the end of the day.
Which credential materials hold up best to repeated wear?
Woven lanyards, rigid badge holders and badge reels with a sturdy clip hold up best when creds are worn every day or reused across events. Woven straps carry the design in the thread itself, so the logo cannot rub off. Rigid holders resist bending in a pocket or a bag, while soft vinyl holders are lighter but can crease and cloud with heavy handling.
| Component | Best for reuse | Watch for |
|---|---|---|
| Woven lanyard | Staff and season credentials | Fine detail is simplified in the weave |
| Dye sublimated lanyard | Full-color sponsor and brand designs | Avoid harsh scrubbing of the printed face |
| Rigid badge holder | Daily employee ID and access cards | Scratches on the clear face over time |
| Vinyl badge holder | Single conferences and short events | Creasing and clouding after heavy use |
| Badge reel | Hospital, campus and office ID | Cord tension after constant pulling |
For a deeper look at strap options, see the custom lanyards range and the badges and passes page, then ask Custom Creds which combination fits how often your team will wear them.

How do you clean lanyards and badge holders without damaging the print?
Clean lanyards by hand in cool water with a mild soap, then let them air dry flat; wipe badge holders with a soft cloth and a gentle cleaner. Most damage to reusable creds comes from heat and abrasion, not from dirt, so skip the dryer, the iron and rough scrubbing pads.
- Remove the badge holder, card and any reel before washing a lanyard.
- Unclip or open the breakaway so water reaches the whole strap.
- Soak briefly in cool, soapy water and work the strap gently between your fingers.
- Rinse until the water runs clear and press out moisture with a towel.
- Hang or lay flat away from direct heat until completely dry.
- Wipe the clear face of each badge holder with a soft, lint-free cloth.
Hospitals and clinics often have their own infection control rules for anything worn near patients. If your facility requires specific disinfectants, check that guidance first and test one strap before cleaning an entire batch. The healthcare worker lanyards page covers breakaway and staff ID options built for frequent wear.
Metal hardware such as bulldog clips and swivel hooks should be dried thoroughly after washing so moisture does not sit in the hinge.
What is the best way to store creds between events?
Store creds clean, dry and sorted by access tier in labeled bins or zip bags, away from sunlight and heat. Sorting at collection time saves hours later: when lanyards come back already grouped by color or role, next year’s check-in team can hand them out without untangling a box of mixed straps.
A simple storage routine works for most teams:
- Coil, do not knot: loosely coil each lanyard so straps do not kink at the attachment.
- Separate holders: stack rigid badge holders flat so the clear faces do not scratch each other.
- Retire the inserts: pull out dated cards before storage so an old event pass is never reissued by mistake.
- Label each bin: note the tier, color and the event the creds last served.
- Keep a spares bag: set aside a handful of each tier for lost or damaged credentials.
Avoid storing creds in a car trunk, a hot storage unit or a sunny office window. Heat can warp vinyl holders, and long exposure to strong light can dull printed colors. A closet shelf or a sealed plastic tote in a climate-controlled room keeps a reusable set looking new.
Can you reuse event creds without weakening access control?
Event creds can be reused safely when the strap is evergreen and the access information lives on a card or insert that changes for each event. Reusing a full credential, card included, is where security slips: an old pass still in a drawer can look valid to a busy door volunteer.
Plan reuse around three habits. First, keep tier colors consistent year over year so staff learn them, but change the card design, date or event name each time. Second, collect and count credentials at load-out, especially all-access and backstage tiers. Third, destroy retired inserts rather than tossing them in a recycling bin intact.
The guide to custom event credentials explains how VIP, staff and media passes are usually separated. For teams that need passes to open doors, a reusable strap paired with a fresh card each event keeps the system clean. Custom Creds can match new inserts to lanyards you already own, so the refreshed set still looks like one program rather than a patchwork of old and new pieces.
When a cred is reported lost, retire that card design for the rest of the event if your access plan depends on it.
When should you replace creds instead of cleaning them?
Replace creds when the strap is frayed, the breakaway no longer releases, the clip has lost its grip or the badge holder has clouded enough to hide the card. Cleaning restores appearance, but it cannot fix a safety feature that has stopped working, and worn credentials make a team look less organized at the front door.
Run a quick inspection when creds come out of storage:
- Pull each breakaway connector to confirm it separates and reconnects cleanly.
- Check bulldog clips, swivel hooks and badge reels for bent or loose parts.
- Look along the strap for fraying edges, faded color or a peeling print.
- Hold badge holders to the light to spot cracks and heavy scratching.
Breakaway function matters most for schools, hospitals and anyone working around machinery, so treat a failed breakaway as a reason to pull that lanyard immediately. See the schools and universities page for credential setups built around student safety.
If a large share of a set fails inspection, reorder rather than patching. Custom Creds keeps your approved artwork on file, so a replacement run matches the originals.
How do you order creds that are built to be reused?
Order reusable creds by choosing a durable strap, keeping dates off the permanent pieces and separating the evergreen parts from the event-specific inserts. Custom Creds builds the mockup around that plan, so you see the reusable lanyard and the swappable card side by side before anything is produced.
- Tell Custom Creds how often the creds will be worn and for how many events.
- Pick a strap: woven for longevity, dye sublimated for full-color brand art, as covered on the dye sublimated custom lanyards page.
- Choose a rigid badge holder or reel for daily ID, or vinyl for short events.
- Keep year, date and event name on the insert only.
- Approve the free mockup, delivered within 24 hours, with unlimited free revisions.
The minimum order is 12, so even a small staff team can start a reusable program, and standard turnaround is about 2 weeks after approval, with faster turnaround available through express shipping. You pay nothing until you approve the design. Start through the quote form and mention that the set should last beyond a single event.
Frequently asked questions
Can custom creds go through a washing machine?
Custom creds are safest washed by hand, because a washing machine tumbles metal clips and breakaway connectors against the strap and can scuff the print. If you must machine wash lanyards, remove every badge holder and reel, place the straps in a mesh laundry bag and use a gentle cold cycle. Always air dry them afterward, since dryer heat is harder on printed straps than the wash itself.
Do dye sublimated creds fade faster than woven ones?
Dye sublimated creds and woven creds both hold color well, but they age differently. Sublimated lanyards carry the design printed into the fabric surface, so harsh scrubbing and strong sunlight are what dull them over time. Woven lanyards build the design from colored thread, so the logo cannot wear off, though fine detail is simplified. Custom Creds can recommend which suits a strap meant for years of reuse.
How should a school collect creds at the end of the year?
School creds are easiest to collect when each classroom or department returns its lanyards and badge holders in one labeled bag on a set day. Ask staff to pull out student or visitor cards first, then check breakaways and clips as items come in. Custom Creds can reprint fresh inserts over the summer so the same lanyards return in fall looking like a coordinated set.
Should reusable creds have the event year printed on them?
Reusable creds should keep the event year off the lanyard and the badge holder, because a dated strap cannot be reused without looking out of date. Put the year, venue and event name on the card or insert instead, where a fresh print each season costs far less than replacing every strap. Custom Creds can design both pieces together so the permanent and seasonal parts still match.
What should a team do with retired event creds?
Retired event creds should have their access cards destroyed, ideally shredded, so an old pass cannot be reused to slip past a door. Lanyards and holders in good condition can go into storage for the next event, donation to a local club or recycling where facilities accept the material. Keeping a simple count of returned and retired creds also shows how many to reorder next time.
Can I order replacement inserts for creds I already own?
Replacement inserts for creds you already own are a common request, especially for staff programs that keep lanyards and holders year after year. Send Custom Creds a photo or the details of your current badge holder so the new cards fit, along with artwork and any name list. The team returns a free mockup within 24 hours, and you pay nothing until you approve it.
How do I keep badge reels working after months of daily use?
Badge reels last longest when the card is attached securely and the cord is guided back slowly rather than snapped back from full extension. Wipe the reel face with a damp cloth instead of soaking it, since water can reach the spring inside. Custom Creds offers badge reels with sturdy clips for hospital, campus and office teams who scan or show ID many times a day.
Are vinyl badge holders worth keeping after a conference?
Vinyl badge holders from a conference are worth keeping only if they are still clear, uncreased and the right size for your next card. Soft vinyl tends to cloud and crack with repeated bending, so it suits short events better than daily wear. For credentials you plan to reuse often, Custom Creds usually suggests rigid holders, which keep cards flat and readable for much longer.
Can volunteers take creds home and bring them back next year?
Volunteer creds can go home with volunteers, but return rates are rarely complete, so most organizers order spares rather than count on every lanyard coming back. Remove access cards before volunteers leave if the event uses tiered entry. Custom Creds keeps your approved design on file, so topping up a returning volunteer set next year matches the originals without starting artwork over.
Do outdoor events wear out creds faster than indoor ones?
Outdoor creds face sun, rain, sweat and dust, so they generally show wear sooner than credentials worn at an indoor conference. Choose rigid badge holders that resist moisture, rinse lanyards after a muddy or rainy event and dry everything before storage. For festivals, race days and stadium work, Custom Creds can suggest pairing durable staff lanyards with single-use wristbands for guests.
Who should be responsible for storing creds between events?
Credential storage works best with one named owner, usually the operations or volunteer lead, rather than whoever happens to be packing up at load-out. That person counts creds in, checks condition, sorts them by tier and logs what needs replacing. When it is time to reorder, the same owner can send Custom Creds the counts and existing designs so the new batch fits the stored set.
Get a free mockup for your creds
Send your logo or idea and the quantity you have in mind. Custom Creds returns a free mockup within 24 hours, you approve the design before anything is produced, and standard turnaround is about two weeks with faster options available. Get a custom quote.